S4SCR - 4" Hydraulic Submersible Centrifugal Screw Pump

S4SCR, 4", Hydraulic Submersible, Centrifugal, Screw, Pump The S4SCR - 4" Hydraulic Submersible Centrifugal Screw Pump is ideal for pumping high viscosity liquids such as crude oils, latex, molasses and refinery wastes using a positive displacement screw. When pumping lighter materials, the impeller acts as a centrifugal type providing high capacity.

Quick Specs

Discharge Size: 4 Inch
Solids Handling: 2 Inch (50 mm)
Maximum Flow: 875 GPM (3300 LPM)
Maximum Head: 165 Feet (50 M)
Hydraulic Input: 12 GPM (45 LPM) Max.
Hydraulic Pressure: 4000 PSI (272 Bar) Max.
Weight: 54 lbs. (25 Kg)

Key Features

• Unique Centrifugal Screw Impeller for pumping of liquids with viscosities to 25,000 CST
• Small Overall Size allows for use in confined spaces
• Oil Lubricated Seals (can run dry)
• Ceramic coated case for abrasion resistance
• Can be used inline as a booster pump
• Safe Hydraulic Drive can be used where electric power is hazardous or impractical
• Operates with our HT15 to HT35 power units or other hydraulic power sources capable of flows of 7 - 12 GPM

Specifications

WEIGHT: 54 lbs. (25 kg)
HEIGHT: 20 3/4" (53 cm)
DIAMETER (@ widest point): 11 3/4" (30 cm)
DISCHARGE: 4" Camlock or Flange Adaptor
INLET FLANGE: 4" 125# ASA or 100 mm metric
SOLIDS HANDLING: 2" (50 mm) 1-1/2" with strainer
HOSE PORTS: 3/4" JIC (M)
PUMP BODY: Seawater Resistant Aluminum
IMPELLER / SCREW: Nodular Cast Iron
SUCTION CASE: Ceramic Coated
ELASTOMERS: Viton (Std)
HYDRAULIC OIL: 214-320 s.s.u. @ 100°F (64°C)
INPUT FLOW: Max. 12 GPM (45 LPM)
OPERATING PRESSURE: Max. 4000 PSI (272 Bar)
POWER SOURCE: Any Open Center Hydraulic System

Recommended Power Units: HT25DYS, HT30DJS, HT35DD

Full Specifications

York Fluid Controls Limited | 2 Westwyn Court, Brampton, Ontario, Canada ON L6T 4T5 | Tel: 905 454 4013 | Toll Free: 877 454 6066 : sales@yorkfluid.com